Sheet metal buckle making process:
1. Add the required pigments and auxiliary materials to the resin oil and stir evenly through the mixer.
2. Pour the resin oil into the plate making machine, centrifuge it into sheets, install the required mold model on the punching machine, and punch out the corresponding model of button blanks.
3. Pour the button embryo into the multi-function automatic machine, perform molding processing, and then put it into the
Polishing in a polishing machine.
Bar buckling process:
1. Add the required pigments and auxiliary materials to the resin oil and mix them evenly through the mixer.
2. Place the aluminum tube in a waxing bucket and apply wax to make the inner wall of the aluminum tube smooth and waxy for easy removal of the resin rod.
3. Place the waxed aluminum tube on the rod making machine, add the mixed resin oil, and place it on the flying knife slicer.
Cut into desired thickness. After passing through the thickness and thickness machine, a buckle embryo with uniform thickness is obtained.
4. Pour the button embryo into the multi-function automatic machine, perform molding processing, and then put it into the
Polishing in a polishing machine.